Heat trace and freeze protection.

Heat trace cable protects what freezes first — exposed pipes, roof edges, and gutters — before a freeze becomes a burst pipe or an ice dam. It is electrical work as much as anything else: correct circuit sizing, GFCI protection, and a thermostat or controller that actually senses the right conditions, not just a length of cable taped to a pipe.

Skyvolt installs and wires heat trace for both residential and commercial properties, sized to the application rather than a generic length of cable.

• Pipe freeze protection for exterior hose bibs, crawlspaces, and unheated mechanical rooms
• Roof and gutter de-icing to prevent ice dams and gutter failure
• Dedicated GFCI-protected circuits sized for the cable's continuous load
• Thermostat and controller wiring for automatic operation
• Commercial and industrial pipe tracing for process or freeze-protection lines

Heat trace cable draws a steady load for as long as it's cold, which means the circuit — not just the cable — has to be sized correctly from the start. Skyvolt confirms the panel has the capacity before running a dedicated, GFCI-protected circuit to it, the same way any other continuous load is scoped.

A controller or thermostat is part of the installation, not an afterthought — cable that runs constantly regardless of temperature wastes power and shortens its own life.